Hardware N3DS NAND backup possible, I hope.

fuyukaidesu

Well-Known Member
Newcomer
Joined
Mar 2, 2015
Messages
51
Trophies
0
Age
123
XP
729
Country
France
It seems you put the ribbon above the connector instead of below.
Now the connector should be relaxed because the valve should never be raised.

I suggest you to send your console to a professional for repairing.

Here, I tried to take a better picture. I'm pretty sure the ribbon is touching the pins, I can't see how it is "above" the connector: if I press it while pressing the home button when the 3DS is turned on, it's properly detected.
 

Attachments

  • DSC_0064.JPG
    DSC_0064.JPG
    302.9 KB · Views: 255

gamesquest1

Nabnut
Former Staff
Joined
Sep 23, 2013
Messages
15,153
Trophies
2
XP
12,237
Here, I tried to take a better picture. I'm pretty sure the ribbon is touching the pins, I can't see how it is "above" the connector: if I press it while pressing the home button when the 3DS is turned on, it's properly detected.
you have broken the connectors they are not supposed to be lifted up, from the pictures the tops look like they have been snapped off, you were supposed to just pull the cable out without pulling/lifting anything

only way to go fro here is to replace the ports or trying to wedge them into position or something which i doubt would be very reliable
 
Last edited by gamesquest1,

Ninoh-FOX

Otaku Gamer!!
Member
Joined
Jan 22, 2015
Messages
535
Trophies
0
Age
44
Location
Military base.
Website
colorslive.com
XP
650
Country
Spain
Other question, the wire that I use is: AWG30 P/N DM-30-1000.

Is it ok or is better other?

( is under pressure from the wires on the bottom screen, I can not take off all pressure. Anyway the pressure is minimal, only if I push the screen like Hulk )
 
Last edited by Ninoh-FOX,

JacksonS

Well-Known Member
Member
Joined
Feb 13, 2016
Messages
427
Trophies
0
XP
1,232
Country
United States
I'm having some issues with this mod on on New 3DS XL. Weeks ago I installed a micro USB port in the 3DS and used it to downgrade from 10.4 - it worked. Now, it boots up normally instead of giving me an error message even though it's connected to the SD reader and the reader is plugged in. Does anyone know what this might mean? No wires are loose, I redid everything to make sure. Same result.
 

James310

Well-Known Member
Member
Joined
Oct 4, 2015
Messages
977
Trophies
0
Location
Somewhere in California
XP
883
Country
United States
I'm having some issues with this mod on on New 3DS XL. Weeks ago I installed a micro USB port in the 3DS and used it to downgrade from 10.4 - it worked. Now, it boots up normally instead of giving me an error message even though it's connected to the SD reader and the reader is plugged in. Does anyone know what this might mean? No wires are loose, I redid everything to make sure. Same result.
Is it plugged in while it's turning on?
 

JacksonS

Well-Known Member
Member
Joined
Feb 13, 2016
Messages
427
Trophies
0
XP
1,232
Country
United States
People have different error codes , what's the sd card reader your using
Well the error code I consistently got when it was working ended in "00000200 00000000". I'm using this adapter made by Omega:
oucrm.jpg

It's the exact same one I used before so I'm not sure what this means.
 

Site & Scene News

Popular threads in this forum

General chit-chat
Help Users
  • No one is chatting at the moment.
    K3Nv2 @ K3Nv2: Did you pee in the water