When you're redy contact me via PM. I don't want to turn this into a sales thread.those look amazing. how much do you charge? I'm going to hardmod my 2ds on my own, because its worth little and very simple to disassemble. but i dont want to risk my pokemon n3ds when it arrives.
Unfortunately, there is no real solid tutorial. Use the pinouts at 3Dbrew with the pinouuts of the SD card.Those hardmods look sexy, any tut where I can learn how to do it, if is not much to ask.
sameSo glad I am A. Not a noob and B. Downgraded successfully on first try before 10.4 came out and C. Currently 9.2 sysNAND and 10.5 RXtools emuNAND. May the noobs be dealt with so you guys can work on this frankly exciting project! Good luck!
Possibly, but typically it stays.Will this hardmod process wipe out NNID information?
so you mean it aims to do some changes to the original NAND (with NNID), flash it back, and then keep most of original information, but anything bad could possibly happen in this process, right?Possibly, but typically it stays.
If you can get the parts, I can put them on.@hundshamer
Can you also repair flex connectors on a N3DS XL?
They need to be replaced
View attachment 38275
do generic micro sd card adapters work with hardmods
also are these good connectors
http://www.ebay.co.uk/itm/Mini-Micr...175199?hash=item27e647941f:g:sZAAAOxyYYlRxxII
Thanks, all i need is a noob guide step by step with pictures to how to harmode n3ds xl.
Welp, nothing better than using your own opinion lol, so I went ahead and ordered a used US N3DS XL motherboard for $78.Hehe, I broke my N3DS XL last July after I successfully modded it.
1st thing to break was the Left-side flex cable (L button) <- very fragile, and I knew that and was very careful, still I broke it
Getting mad doesn't help, especially when you realize you also fucked the zif connector by trying to lift the cover (there is no cover to lift, silly me)
So 2nd thing I noticed was my Home button no longer worked.
Getting madder certainly is dangerous. I ended up pulling off the top of the flex connector that makes the bottom screen work.
All this after I successfully hard modded it and was getting a good nand.bin on reading.
Anyways, now I'm wondering if I should just order that motherboard I saw on ebay for only $75, and use the procedure in this thread to make it work.
Any opinions?
I'm with a N3DS Bricked, tryied downgrade from 10.3 but put the O3DS cias. Now i'm trying a hardmod to try recover from the brick,
But i'm getting problems with my SD Card Reader, the thing doen'st show in my windows.
I've seeing that guy tryied, but i'll try to.
It does not work.
I think I have a problem. After patching the nand.bin I flashed it back into my 3DS but for some reason the Version in the System Settings is still 10.4.0-29U
Any ideas of what could have gone wrong? Thanks!
Oh, thanks a lot!The version will not change, you are good to go for downgrade though.