- Status
It's as good as on my o3DS, almost 100%...sometime it hangs on 'CTR Boot Menu' when it tries to load the code.bin file inside the rxTools folder....but it's very rare.
Menuhax has less of a successful boot rate in comparison to rxTools. Recommend you try booting rxTools through CTR Boot Menu, instead of rxTools directly. Make CTR Boot Menu your default 'Boot.3dsx' on your root, and rename your Homebrew Menu boot at the root to 'boot_hb.3dsx' and make sure to properly configure the Ctr Boot Menu config file accordingly, so it's able to find these files.
Ex. rxtools -> Path:/rxTools/sys/code.bin
Homebrew Menu -> Path"/boot_hb.3dsx
PastaCFW -> Path:/3ds/PastaCFW/PastaCFW.3dsx
...and so on, add as many entries as you want for the apps you want to coldboot into.
Also don't forget to have the offset on rxTools be '0x12000' under the 'CtrBootMenu' config file...that's pretty much it if you already have all the files in place.
Good luck!
Ok so when I was setting up Rxtools it would hang on the data installation suite on my N3DS so I constantly deleted the Rxtools folder on my sd card and recipients the needed files back on and then it would still hang on the installation suite but then at one point after doing the process again instead of giving me the installation suite it just immediately booted up my EmuNAND and I was able to access the RxTools menu every time I booted it up after that and now it seems to work? So can someone tell me if I'm missing data or how this would've happened and why
Took a while to figure out as to how you inject .app files into H&S on n3DS since rxTools injection method doesn't currently support n3DS, but I managed w/ your suggestion of Decrypt9 + Universal-Inject-Generator!
I had too a bit of digging and reading to know how do it, pretty straight forward. Found the apps & method here for those wondering.
https://github.com/d0k3/Universal-Inject-Generator
Hmm...I did find an anomaly with my friend's New 3DS, is it normal for Emunand's 3D to not properly produce a 3D? The 3D just splits/doubles the image effect but doesn't actually push any 3D effects, it just leaves the image flat while attempting to give you a split/dual image...is this normal for the latest rxTools on New 3DS...does not really support the New 3D tech on this device...yet?
Looking at it again...Sysnand works fine if it's not patched by rxTools, but when it is the 3D is affected just like Emunand...which does confirm that the 3D on New 3DS isn't working properly under the influence of rxTools, I was worried that Emunand was somehow busted in some ways.
Can anyone confirm the same issue?
--------------------- MERGED ---------------------------
It doesn't have a 100% success rate during the installation suite, once it miraculously installs you don't have to worry about it anymore. Translation = Enjoy!
Close the lid and open it again. 3D fixed. This is a problem with all CFWs on N3DS.
Ok thanks also is there a reason why when I'm in my EmuNAND in Rxtools when I go to my system settings it says RX-E instead of RX3D?Took a while to figure out as to how you inject .app files into H&S on n3DS since rxTools injection method doesn't currently support n3DS, but I managed w/ your suggestion of Decrypt9 + Universal-Inject-Generator!
I had too a bit of digging and reading to know how do it, pretty straight forward. Found the apps & method here for those wondering.
https://github.com/d0k3/Universal-Inject-Generator
Hmm...I did find an anomaly with my friend's New 3DS, is it normal for Emunand's 3D to not properly produce a 3D? The 3D just splits/doubles the image effect but doesn't actually push any 3D effects, it just leaves the image flat while attempting to give you a split/dual image...is this normal for the latest rxTools on New 3DS...does not really support the New 3D tech on this device...yet?
Looking at it again...Sysnand works fine if it's not patched by rxTools, but when it is the 3D is affected just like Emunand...which does confirm that the 3D on New 3DS isn't working properly under the influence of rxTools, I was worried that Emunand was somehow busted in some ways.
Can anyone confirm the same issue?
--------------------- MERGED ---------------------------
It doesn't have a 100% success rate during the installation suite, once it miraculously installs you don't have to worry about it anymore. Translation = Enjoy!
Oh ok thanks but why is it that I see people boot into EmuNAND using Rxtools and when they go to their system settings on their EmuNAND it says RX3D? Is there a difference between RX3D and RX-E?
- Joined
- Jan 11, 2016
- Messages
- 811
- Trophies
- 0
- Age
- 32
- Location
- Wherever my imagination decides.
- Website
- fr3quency.deviantart.com
- XP
- 823
- Country
Is there any difference between the Beta and latest Nightly apart from the new commit that fixes data installation? If there is a difference, can I simply use the "data" folder from the latest NIGHTLY(with the data installation fix commit) to boot the BETA release?
the releases NEVER have a data folder. It is created during data installation suite (hence the name). If you want to wait though, there are some cool things on the way for o3DS TWL...
If you're on an o3ds and tried using the last one, simply replace the code.bin. You'll still want to delete your data folder to be sure.
Last edited by urherenow,
- Joined
- Jan 11, 2016
- Messages
- 811
- Trophies
- 0
- Age
- 32
- Location
- Wherever my imagination decides.
- Website
- fr3quency.deviantart.com
- XP
- 823
- Country
Both the Beta and the Nightly builds create a "data" folder inside rxTools folder when you hold L and boot rxTools from CtrBootManager(or the boot manager of your choice). What I meant was to install the Nightly build so that it creates this folder and simply copy the folder and paste it inside the rxTools beta folder. I did it actually. It boots, but inside Settings(rxTools settings) it hangs. I don't know if it's caused because of the data folder I copied from the latest Nightly. I'll stay with the latest nightly for the time being and wait for a new beta release.
Holy crap, do you speak English? That's what I said.
It's never a good idea to mix /data folders between versions. That's why the docs say to delete it.
Last edited by urherenow,
- Joined
- Jan 11, 2016
- Messages
- 811
- Trophies
- 0
- Age
- 32
- Location
- Wherever my imagination decides.
- Website
- fr3quency.deviantart.com
- XP
- 823
- Country
I don't understand why you try to mix newer and older files when you can just use the latest nightly (d2ee1bc).
The latest nightly (d2ee1bc) is the latest 3.0 beta (51703ea) + fixes : https://github.com/roxas75/rxTools/commits/master
No I don't. You need to learn how to read. When you open the .zip file, is there a data folder there? No. They NEVER come with a data folder.
School is good.
Last edited by urherenow,
- Joined
- Jan 11, 2016
- Messages
- 811
- Trophies
- 0
- Age
- 32
- Location
- Wherever my imagination decides.
- Website
- fr3quency.deviantart.com
- XP
- 823
- Country
This is what I did, but some idiot here before said the Nightly of 9/2 is not the same as the beta release. I got b8ed or the idiot didn't know shit.
--------------------- MERGED ---------------------------
Retarded much? y/y? Of course there isn't a data folder when I download the .zip. It gets created when you boot into rxTools menu. It goes without saying.
Edit: it's like saying there is no Windows folder in C:\ when you format. No sht Sherlock!
Last edited by fr3quency,
- Joined
- Jan 22, 2015
- Messages
- 535
- Trophies
- 0
- Age
- 44
- Location
- Military base.
- Website
- colorslive.com
- XP
- 650
- Country
Games for other region appear in home menu without needs of other app, but when I try boot the game the menu said me "Can't boot this card game". It only works with FMP...
- Status
Similar threads
-
K3Nv2
-
Psionic Roshambo
-
The Real Jdbye
*is birb* -
BakerMan
The snack that smiles back, Ballsack! -
Xdqwerty
what are you looking at?
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
@
Psionic Roshambo:
There is some really odd DS games I liked but not sure others would like them lol
-
-