ROM Hack Animal Crossing: New Leaf Save Editor

notamber92 · Oct 6, 2015

Am I blind or is the Dock coordinates missing from the save editor?

Deleted User · Oct 6, 2015

notamber92 said:
Am I blind or is the Dock coordinates missing from the save editor?

You shouldn't change the dock coordinates anyways, I'm pretty sure doing that can make it impossible for you to go to the island if done incorrectly.

notamber92 · Oct 6, 2015

Tomato Hentai said:
You shouldn't change the dock coordinates anyways, I'm pretty sure doing that can make it impossible for you to go to the island if done incorrectly.

I've done it before and I get to the island just fine, I do a decent job of figuring out the coordinates. I want to change my map. I already chose the way I want it to look, but the waterfall would be in the spot where my dock was. Guess I just have to wait for someone to put it back on the editor.

regigiygas · Oct 6, 2015

notamber92 said:
I've done it before and I get to the island just fine, I do a decent job of figuring out the coordinates. I want to change my map. I already chose the way I want it to look, but the waterfall would be in the spot where my dock was. Guess I just have to wait for someone to put it back on the editor.

the NLSE program (not website) gives you the ability to move your dock.

notamber92 · Oct 6, 2015

regigiygas said:
the NLSE program (not website) gives you the ability to move your dock.

Didn't know there was a program. Does it work on mac, and where do I download it?

jayetyler · Oct 6, 2015

notamber92 said:
Didn't know there was a program. Does it work on mac, and where do I download it?

the offline version of NLSE is by kaphotics and this is his github : )
https://github.com/kwsch/NLSE/releases

Sarawr · Oct 6, 2015

samiam144 said:
Okay there are a few pieces of information you need to know:

The ram method doesn't work on Gateway Emunand (for like 99% of people). Actually, it doesn't work in Emunand in general, although there are some lucky enough for it to work.

You can't use savedatafiler on an original cartridge using Gateway because of their rom menu patches.

You can't use NTR 3.0 + the save plugin either because of the same reason above.

The homebrew save apps like SVDT, TDVS, and Savedatamanager won't be able to see your cart in Gateway emunand or sysnand for the same reason above.

The only way for you to extract your save easily is to first setup a CFW like rxTools, Cakes, etc., at which point all the above options will be available to you;
OR run the Homebrew Launcher in regular sysnand (meaning NO gateway patches). Have you tried browserhax or themehax?

Thank you for giving me the right info! Everywhere I went was so conflicting! I have not tried either hax yet, I believe the browser one doesn't work though due to the fact that my browser is not a supported version it's 1.7498. Does rxTools require homebrew or does it work with emunand?

samiam144 · Oct 6, 2015

Sarawr said:
Thank you for giving me the right info! Everywhere I went was so conflicting! I have not tried either hax yet, I believe the browser one doesn't work though due to the fact that my browser is not a supported version it's 1.7498. Does rxTools require homebrew or does it work with emunand?

Yep, Browserhax has some issues but some of them were fixed so it may work for you.

Rxtools is similar to Gateway, you can run it through the browser and load your emunand or sysnand with access to run any CIA. It can do many other things as well. It is very simple to do since you have a gateway already. You just need to put the files on your SD card, launch it via the browser (similar to Gateway), and extract your save with Savedatafiler. There is a tut in my signature.

StevenSeegal · Oct 7, 2015

Sarawr said:
Thank you for giving me the right info! Everywhere I went was so conflicting! I have not tried either hax yet, I believe the browser one doesn't work though due to the fact that my browser is not a supported version it's 1.7498. Does rxTools require homebrew or does it work with emunand?

Just to give you a bit of info from what i've done today:
I'm using a New 3DS XL on the latest firmware.
I've been playing Animal Crossing for 3 months on my sky3ds card and decided to buy the original gamecard. I didn't want to loose my progress but was able to inject my old save into the new card by using SVDT via the browserhax. Ofcource i had to edit the timestamp in the save but that's only because of the transfer from one card to the other.
Maybe this info is helpfull to you.

notamber92 · Oct 7, 2015

jayetyler said:
the offline version of NLSE is by kaphotics and this is his github : )
https://github.com/kwsch/NLSE/releases

Thanks! I just realized it's a Windows program lol I've been using a Mac smh.

jayetyler · Oct 7, 2015

notamber92 said:
Thanks! I just realized it's a Windows program lol I've been using a Mac smh.

you could possibly try wine or bootcamp? [i have no experience with wine but i used bootcamp a while back when i had to work on macs only : P]

Sarawr · Oct 7, 2015

I GOT IT WORKING YAY! It was easier, I didn't even need to use rxTools, I finally found out how to boot Gateway into SysNAND so I could install the browser update

turns out all you need to do is hold B and press A while over the "Boot into Gatewaymode" and it changes it, this allows you to install/edit the SysNand

Sarawr · Oct 7, 2015

Okay run into an issue, everytime my character leaves her house, she faints and it goes back, then she faints again, it's an endless cycle.

EDIT: nvm I fixed it, turned out my house was in an invalid spot, once I moved it, it was fine

notamber92 · Oct 7, 2015

jayetyler said:
you could possibly try wine or bootcamp? [i have no experience with wine but i used bootcamp a while back when i had to work on macs only : P]

I got it now : )!

Deleted User · Oct 8, 2015

Sarawr said:
Okay run into an issue, everytime my character leaves her house, she faints and it goes back, then she faints again, it's an endless cycle.

EDIT: nvm I fixed it, turned out my house was in an invalid spot, once I moved it, it was fine

Invalid spot? Can I ask where? I accidentally moved my Mayor character's house inside the Town Hall once and I never had any issues with exiting my house.

gg132 · Oct 9, 2015

marc_max said:
Did you even read the first post? Your firmware is compatible with the homebrew method.

Guess I didn't see that. Just saw on the front page that my firmware wouldn't work. I didn't see anything on homebrew.

Sarawr · Oct 9, 2015

Tomato Hentai said:
Invalid spot? Can I ask where? I accidentally moved my Mayor character's house inside the Town Hall once and I never had any issues with exiting my house.

Was on a cliff side area so it looked like it over looked the water. I found out the issue, it was because I had literally moved the house up 2 squares from where it originally was, so it acted like it was still in the other spot, once I moved it, saved, then moved it again, it was fine.

Bridget Maher · Oct 9, 2015

I was wondering if anyone who has successfully gotten the new RAM hack to work could make a video on how to do it for those who haven't mastered it quite yet (like me) because it would help me out a lot.
Thanks!~

Sarawr · Oct 10, 2015

Bridget Maher said:
I was wondering if anyone who has successfully gotten the new RAM hack to work could make a video on how to do it for those who haven't mastered it quite yet (like me) because it would help me out a lot.
Thanks!~

What version is your browser? To check that you go to the browser, click the little spanner icon, scroll all the way down, and post the version. Also what version is your DS Firmware?

anais · Oct 10, 2015

disregard this post, everything is fine now ~

ROM Hack Animal Crossing: New Leaf Save Editor

Member

Deleted User

Guest

Member

??? bees maybe

Member

Well-Known Member

Active Member

Régulier

Well-Known Member

Member

Well-Known Member

Active Member

Active Member

Member

Deleted User

Guest

Member

Active Member

Member

Active Member

Member

Similar threads

Popular threads in this forum