Hardware Usbloader GX 3.0 boot OK but no more wiimote !

Cyan · Aug 24, 2014

Ah, it's great you found a controller.

You didn't have Bootmii installed in boot2 even while your console was compatible? (only old Wii can install boot2)
Bootmii has better protection than priiloader and it's launched before it. All guide should tell users to install boot2 if possible. That will have helped you on your issue if you already had it, the GC controller wasn't required.

if you edited the bootmii.ini on your SD, you said to boot HBC with 0 second delay, so when you power on your console it autoboot HBC.
If you want to pass trhough priiloader again, you need to edit the ini file and replace HBC with SYSMENU

it will load the System menu file (Priiloader is actually a replacement of the System menu, the real System menu has been renamed)
Boot > bootmi > priiloader (fake system menu) > system menu (real)

I think the issue with the wiimote still losing synch is caused by cIOS.
You should reinstall d2x cIOS in your slot249 (and maybe 250), and it will even fix the game issue.

If wiimote lose synch in Wad manager too, Do step5 before Step4.
Use this link,
http://www.mediafire.com/view/5ggh53tj9hhp1tr/d2x-cios-installer-3.1-v6-v7-v8-v10-wii.7z
install d2x v8 or v10
slot249 : base 56
slot250: base 57

I still don't understand how a freeze could modify the installed IOS. it's probably a cIOS bug. It's not the first time user report losing synch (I once had that issue too).

Hla · Aug 24, 2014

Cyan said:
Ah, it's great you found a controller.

You didn't have Bootmii installed in boot2 even while your console was compatible? (only old Wii can install boot2)

Yes, since my previous problems i've reinstalled bootmii on boot2 and it works well.

Bootmii has better protection than priiloader and it's launched before it. All guide should tell users to install boot2 if possible. That will have helped you on your issue if you already had it, the GC controller wasn't required.

Effectively now when i lose synchro (just one or two times when i did my tests), i don't need anymore the GC controller to resynchronize.

if you edited the bootmii.ini on your SD, you said to boot HBC with 0 second delay, so when you power on your console it autoboot HBC.
If you want to pass trhough priiloader again, you need to edit the ini file and replace HBC with SYSMENU

it will load the System menu file (Priiloader is actually a replacement of the System menu, the real System menu has been renamed)
Boot > bootmi > priiloader (fake system menu) > system menu (real)

I think the issue with the wiimote still losing synch is caused by cIOS.
You should reinstall d2x cIOS in your slot249 (and maybe 250), and it will even fix the game issue.

If wiimote lose synch in Wad manager too, Do step5 before Step4.
Use this link,
http://www.mediafire.com/view/5ggh53tj9hhp1tr/d2x-cios-installer-3.1-v6-v7-v8-v10-wii.7z
install d2x v8 or v10
slot249 : base 56
slot250: base 57

I did exactly all what you say above and now all works perfectly : when i start the wii, the USBLOADERGX is started. That's the behavior i wanted.

I still don't understand how a freeze could modify the installed IOS. it's probably a cIOS bug. It's not the first time user report losing synch (I once had that issue too).

All of my games are working ok but unfortunatly i still have black screen with most of that channels :
- News (connexion failure, error code 10731)
- Wii shop (connexion failure, error code 10731)
- Weathernews
- Today and Tomorrow
- Youtube
- Hombrew Channel freeze on the first screen : "this software must not be sold ...."

Also with the games :
- Wii Fit Plus
- Wii Play Motion
- Wii Party

The only working channels are Photo v1.1 and Mii Channel.

And for all of them "Return to Wii Menu" = Black screen, i must put off then on on front panel.

Aslo "return to" parameter in usbloaderGX configuration/Loader parameters is set as "4c554c5a"
When i try to change to any other choice, i have this :
LULZ = Hombrew Channel
UNEO = unknown
HAVP = Today and Tomorrow channel
HCXP = Youtube
[blank] = Delete
but any choice i do, it returns always on 4c554c5a

Any idea ? Perhaps transfer the questions in another discussion ?

Cyan · Aug 24, 2014

Sorry, there's a lot of subjects answered randomly, I hope you will understand.

•
Nintendo discontinued his network service for most channels.
News, weather, and I don't know "today and tomorrow" but I guess it's a network channel too.
these will not work anymore.

•
When you launch a channel from the loader, it's using the current IOS defined in settings>Game's IOS. (I will change that later to always reload the correct IOS).
Using slot249 with some channel is the issue you have:

I don't know about Youtube, but :
eshop : require IOS52
Homebrew channel : require IOS58

Select Home > "exit to System menu", and launch it from here.
If you can't exit to System menu, it's due to Priiloader replacing the system menu and reloading USBLoaderGX automatically. There's an option in the loader to prevent this (settings>parental setting>bypass priloader).

•
If you want to launch the Homebrew channel, Home>Exit>HBC.
(you can add more option to the Home menu in Settings>GUI>Home menu: Full)

•
About the return to:
When you exit a game using the "Home menu > Return to Wii Menu", instead of returning to System menu, you can tell the game to return to any installed channels.
UNEO = USBLoaderGX, this is the one you installed in the guide on the previous page, and this is the one you need to choose to return to the loader when exiting the game.
4c554c5a = LULZ = Homebrew Channel

•
If you see the numbers instead of the code or name, something is not setup correctly.
If you launch the loader from the Forwarder 5.1, it should work.
if "Return to" setting doesn't display/save correctly, maybe you are using an old forwarder, or you are still launching the loader directly from priiloader instead of the forwarder. (you correctly installed the forwarder dol in priiloader?)

I always thought it was not normal that installing the forwarder.dol in priiloader worked for other users.
In my opinion, it's not the correct setup, but all other users are doing it fine.

I don't use priiloader so I can't debug

•
But there's another possibility

if you have bootmii installed at boot2, you can tell bootmii to autoload the forwarder channel instead of loading priiloader.
replace bootmii file on your SD card with this one : http://www.mediafire.com/download/o5zj30ti0am/bootmii_mod_UNEO.zip
(keep a backup of the original bootmii file to restore it in case of need)

It will load the loader much faster than passing through priiloader, and should fix your "return to" menu not showing channel name.

Hla · Aug 25, 2014

Cyan said:
Sorry, there's a lot of subjects answered randomly, I hope you will understand.

•
Nintendo discontinued his network service for most channels.
News, weather, and I don't know "today and tomorrow" but I guess it's a network channel too.
these will not work anymore.

Just to precise i said :
All of my games are working ok but unfortunatly i still have black screen with most of that channels :

all of this was from UsbloadeGX, but with wii menu here is the behavior :

- News (connexion failure, error code 10731) fail with error code 107304 (problem with wiiconnect24 internet connexion)
- Wii shop (connexion failure, error code 10731) works
- Weathernews fail with error code 107304 (problem with wiiconnect24 internet connexion)
- Today and Tomorrow works
- Youtube works
- Hombrew Channel freeze on the first screen : "this software must not be sold ...." works

So except for the 2 channels which need wiiconnect24 (it's perhaps a network problem at me) , all are working with wii menu but not with usbloadergx.

•
When you launch a channel from the loader, it's using the current IOS defined in settings>Game's IOS. (I will change that later to always reload the correct IOS).
Using slot249 with some channel is the issue you have:

I don't know about Youtube, but :
eshop : require IOS52
Homebrew channel : require IOS58

Yes perhaps we must define some differents IOS regardless the channel we want to load under usbloadergx.

Select Home > "exit to System menu", and launch it from here.
If you can't exit to System menu, it's due to Priiloader replacing the system menu and reloading USBLoaderGX automatically. There's an option in the loader to prevent this (settings>parental setting>bypass priloader).

•
If you want to launch the Homebrew channel, Home>Exit>HBC.
(you can add more option to the Home menu in Settings>GUI>Home menu: Full)

It's ok with the "Settings>GUI>Home menu: Full", now i have 2 choices when pushing home button to return : HBC or Wii. It's more convinient.

•
About the return to:
When you exit a game using the "Home menu > Return to Wii Menu", instead of returning to System menu, you can tell the game to return to any installed channels.
UNEO = USBLoaderGX, this is the one you installed in the guide on the previous page, and this is the one you need to choose to return to the loader when exiting the game.
4c554c5a = LULZ = Homebrew Channel

Yes but as i said, any choice i do it returns always on 4c554c5a. it's very boring.

•
If you see the numbers instead of the code or name, something is not setup correctly.
If you launch the loader from the Forwarder 5.1, it should work.
if "Return to" setting doesn't display/save correctly, maybe you are using an old forwarder, or you are still launching the loader directly from priiloader instead of the forwarder. (you correctly installed the forwarder dol in priiloader?)

I didn't say you before but i don't remember when it came, i have 2 forwarders in my wad folder :
USB Loader GX-UNEO_Forwarder_5_1_AHBPROT (For vWii ONLY).wad (06/01/2013)
USB Loader GX-UNEO_Forwarder_5_1_AHBPROT.wad (11/05/2012)
Which of them must i use ?

I always thought it was not normal that installing the forwarder.dol in priiloader worked for other users.
In my opinion, it's not the correct setup, but all other users are doing it fine.

I don't use priiloader so I can't debug

•
But there's another possibility
if you have bootmii installed at boot2, you can tell bootmii to autoload the forwarder channel instead of loading priiloader.
replace bootmii file on your SD card with this one : http://www.mediafire.com/download/o5zj30ti0am/bootmii_mod_UNEO.zip
(keep a backup of the original bootmii file to restore it in case of need)

I tried but the wii doesn't boot : black screen.
But for me it's not a problem as i said i boot directly on usbloadergx with the original ppcboot.elf and it's fine as it.

It will load the loader much faster than passing through priiloader, and should fix your "return to" menu not showing channel name.

To conclude : expect the "return to" in the usbloadergx paramaters, i consider that my configuration is now enough stable and i (we) spent (too) many time to do that.

Again thank you.

Cyan · Aug 25, 2014

use USB Loader GX-UNEO_Forwarder_5_1_AHBPROT.wad (11/05/2012)
You are on Wii, so don't install the "vWii" version, it's for WiiU console only.

I don't know why "return to" setting doesn't save correctly for you.

I'm glad you could fix your issue and your daughter can play again!

Hla · Sep 14, 2014

Hi,

I upgraded usbloader GX v3.0 with recently r1231 and i added a new game.
Again no more games can be played or just play one time and can't be played the
next time. Sometimes i can reach the game begining but the video display looks bad and/or the game have no menus.

I've done many IOS upgrades via D2xDowloader, and i used the pimpmywii tests and corrects but the result is the same.

Here are the syscheck and pimpmywii logs :
I don't think all is ok : for example HBC runs ok but syscheck says like if it were not installed...., about IOS i don't know.

If you see something wrong please let me know what about.

Code:

sysCheck v2.1.0b19 par Double_A et R2-D2199, Nano
...tourne sous l'IOS58 (rev 6176).
 
Region: PAL
Menu Systeme 4.3E (v514)
Priiloader installe
Date de disque: 2007.02.13
 
HomebrewFilter ist nicht installiert
Hollywood v0x11
Identifiant de la console: 73686225
Boot2 v4
95 titres trouves.
54 IOS trouves sur cette console. 9 sont des stubs.
 
IOS4 (rev 65280): Stub
IOS9 (rev 1034): Trucha Bug
IOS10 (rev 768): Stub
IOS11 (rev 256): Stub
IOS12 (rev 526): Trucha Bug
IOS13 (rev 1032): Trucha Bug
IOS14 (rev 1032): Trucha Bug
IOS15 (rev 1032): Trucha Bug
IOS16 (rev 512): Stub
IOS17 (rev 1032): Trucha Bug
IOS20 (rev 256): Stub
IOS21 (rev 1039): Trucha Bug
IOS22 (rev 1294): Trucha Bug
IOS28 (rev 1807): Trucha Bug
IOS30 (rev 2816): Stub
IOS31 (rev 3608): Trucha Bug
IOS33 (rev 3608): Trucha Bug
IOS34 (rev 3608): Trucha Bug
IOS35 (rev 3608): Trucha Bug
IOS36 (rev 3608): Trucha Bug, ES Identify, Acces NAND
IOS37 (rev 5663): Trucha Bug
IOS38 (rev 4124): Trucha Bug
IOS40 (rev 3072): Stub
IOS41 (rev 3607): Pas de patches
IOS43 (rev 3607): Pas de patches
IOS45 (rev 3607): Pas de patches
IOS46 (rev 3607): Pas de patches
IOS48 (rev 4124): Pas de patches
IOS50 (rev 5120): Trucha Bug
IOS51 (rev 4864): Stub
IOS52 (rev 5888): Stub
IOS53 (rev 5663): Trucha Bug
IOS55 (rev 5663): Trucha Bug
IOS56 (rev 5662): Trucha Bug
IOS57 (rev 5919): Trucha Bug
IOS58 (rev 6176): USB 2.0
IOS60 (rev 6400): Trucha Bug
IOS61 (rev 5662): Pas de patches
IOS62 (rev 6430): Trucha Bug
IOS70 (rev 6912): Trucha Bug
IOS80 (rev 6944): Trucha Bug
IOS202[60] (rev 65535, Info: Hermes-v55.1): Trucha Bug, Acces NAND, USB 2.0
IOS222[38] (rev 65535, Info: Hermes-v55.1): Trucha Bug, ES Identify, Acces NAND, USB 2.0
IOS223[37] (rev 65535, Info: Hermes-v55.1): Trucha Bug, Acces NAND, USB 2.0
IOS224[57] (rev 65535, Info: Hermes-v55.1): Trucha Bug, Acces NAND, USB 2.0
IOS245[37] (rev 21008, Info: d2x-v8final): Trucha Bug, Acces NAND, USB 2.0
IOS246[38] (rev 21008, Info: d2x-v8final): Trucha Bug, ES Identify, Acces NAND
IOS247[53] (rev 21008, Info: d2x-v8final): Trucha Bug, Acces NAND, USB 2.0
IOS248[55] (rev 21008, Info: d2x-v8final): Trucha Bug, Acces NAND, USB 2.0
IOS249[56] (rev 21010, Info: d2x-v10beta52): Trucha Bug, Acces NAND, USB 2.0
IOS250[57] (rev 65535, Info: d2x-v10beta52): Trucha Bug, Acces NAND, USB 2.0
IOS251[58] (rev 21010, Info: d2x-v10beta52): Trucha Bug, Acces NAND, USB 2.0
IOS252[80] (rev 21010, Info: d2x-v10beta53-alt): Trucha Bug, Acces NAND, USB 2.0
IOS254 (rev 65281): BootMii
BC v6
 
MIOS v10

Code:

Pimp v3.02
IOS 251. HW_AHBPROT
Device ID 4645cd1
Boot2 v4
Boot1 hash ef3ef7819608d56df5679a6f92e13f78bbddfdf
Common key ebe42a225e8593e448d9c5457381aaf7
NG id 4645cd1
NG private key e8654fef72787c8a76f79d625c82dd2d216bf012007680476de2773f1376fdaf5b39dd
NAND HMAC 3f1376fdaf5b39ddeeaa6bd776530be246792a79
NAND key 276a7d6ab73b55c095d1d024c13b8fbe
RND KEY 4ef592ef6351c5417998012070e9241d
Priiloader installed
IOS 0 v0 Modified
Menu Systeme (Menu Systeme 4.3E)v514 (Use IOS 80) Original
IOS 4 v65280 Original stub
IOS 9 v1034 Modified Trucha
IOS 10 v768 Original stub
IOS 11 v256 Original stub
IOS 12 v526 Modified Trucha
IOS 13 v1032 Modified Trucha
IOS 14 v1032 Modified Trucha
IOS 15 v1032 Modified Trucha
IOS 16 v512 Original stub
IOS 17 v1032 Modified Trucha
IOS 20 v256 Original stub
IOS 21 v1039 Modified Trucha
IOS 22 v1294 Modified Trucha
IOS 28 v1807 Modified Trucha
IOS 30 v2816 Original stub
IOS 31 v3608 Modified Trucha
IOS 33 v3608 Modified Trucha
IOS 34 v3608 Modified Trucha
IOS 35 v3608 Modified Trucha
IOS 36 v3608 Modified Trucha Downgrade ES_Identify Nand access
IOS 37 v5663 Modified Trucha
IOS 38 v4124 Modified Trucha
IOS 40 v3072 Original stub
IOS 41 v3607 Original
IOS 43 v3607 Original
IOS 45 v3607 Original
IOS 46 v3607 Original
IOS 48 v4124 Original
IOS 50 v5120 (source rev 4889) Modified Trucha
IOS 51 v4864 Original stub
IOS 52 v5888 Original stub
IOS 53 v5663 Modified Trucha
IOS 55 v5663 Modified Trucha
IOS 56 v5662 Modified Trucha
IOS 57 v5919 Modified Trucha
IOS 58 v6176 Original
IOS 60 v6400 (source rev 6174) Modified Trucha
IOS 61 v5662 Original
IOS 62 v6430 Modified Trucha
IOS 70 v6912 (source rev 6687) Modified Trucha
IOS 80 v6944 Modified Trucha
IOS 202 (source 60) (Hermes 60 v5 5.1)v65535 Modified Trucha ES_Identify Nand access
IOS 222 (source 38) (Hermes 38 v5 5.1)v65535 Modified Trucha ES_Identify Nand access
IOS 223 (source 37) (Hermes 37 v5 5.1)v65535 Modified Trucha ES_Identify Nand access
IOS 224 (source 57) (Hermes 57 v5 5.1)v65535 Modified Trucha ES_Identify Nand access
IOS 245 (source 37) (d2x 37 v8 final)v21008 Modified
IOS 246 (source 38) (d2x 38 v8 final)v21008 Modified
IOS 247 (source 53) (d2x 53 v8 final)v21008 Modified
IOS 248 (source 55) (d2x 55 v8 final)v21008 Modified
IOS 249 (source 56) (d2x 56 v10 beta52)v21010 Modified Trucha Downgrade ES_Identify Nand access
IOS 250 (source 57) (d2x 57 v10 beta52)v65535 Modified Trucha Downgrade ES_Identify Nand access
IOS 251 (source 58) (d2x 58 v10 beta52)v21010 Modified Trucha Downgrade ES_Identify
IOS 252 (source 80) (d2x 80 v10 beta53-alt)v21010 Modified
IOS 254 v65281 Modified stub
BC v6 Original
MIOS v10 Modified
00010001-48415650 HAVP  (Downloaded channels) v512 (Use IOS 55) Original
00010001-48435850 HCXP  (Downloaded channels) v1281 (Use IOS 56) Original
00010001-4c554c5a LULZ Homebrew Channel (Downloaded channels) v258 (Use IOS 58) Modified
00010001-554e454f UNEO  (Downloaded channels) v512 (Use IOS 58) Modified
00010002-48414141 HAAA Photo Channel (System channels) v2 (Use IOS 13) Original
00010002-48414241 HABA Chaine Boutique Wii (System channels) v21 (Use IOS 56) Original
00010002-48414341 HACA Mii Channel (System channels) v6 (Use IOS 31) Original
00010002-48414641 HAFA Weather Channel (1/2) (System channels) v3 (Use IOS 13) Original
00010002-48414650 HAFP Weather Channel (2/2) (System channels) v7 (Use IOS 31) Original
00010002-48414741 HAGA News Channel (1/2) (System channels) v3 (Use IOS 13) Original
00010002-48414750 HAGP News Channel (2/2) (System channels) v7 (Use IOS 31) Original
00010002-48415941 HAYA Photo Channel 1.1 (System channels) v3 (Use IOS 61) Original
00010004-52464e50 RFNP  (Games channels) v0 (Use IOS 33) Original
00010004-52465050 RFPP  (Games channels) v0 (Use IOS 53) Original
00010008-48414b50 HAKP EULA (Hidden channels) v3 (Use IOS 56) Original
00010008-48414c50 HALP  (Hidden channels) v2 (Use IOS 31) Original
Homebrews SD
pimp_my_wii version 3.02
priiloader version 0.7 FRA plus
usbloader_gx version 3.0 
AnyTitleDeleterDB version 1.0 v4
WADManager version rev25
d2x-cios-installer-3.1-v6-v7-v8-v10 version 3.1
Trucha bug restorer v1.14 version v1.14
syscheck version 2.1.0.b19

Thanks for any help.

Hla · Sep 14, 2014

Leave it.

I resolved my problem reinstalling correctly the HBC, d2X CIOS, and USBLOADER GX.

Cyan · Sep 14, 2014

and don't use pimp my wii anymore.
it will prevent messing up your system files.

You only need 2 cIOS, patching everything else is not useful (and creates issues).

Hla · Sep 16, 2014

Thanks for the advice, i presume the 2 cios are dx2 249 and 250.
I precise the "return to" is ok now.

Jordanli8 · Sep 8, 2017

Hla said:
Hi,

I use Hombrew Channel with USBLOADER GX 3.0 (installed on my SD card with Pack Hack WII), 1 SD Card to boot, and an USB Disk for games storing. This since a week ago.
Later i've installed Priiloader0_8_beta4.

Since i've USB, everyday i put new games for my children with WiiBackupManager, and all is working well.
All works perfectly with my personals configuration options especialy direct boot to USBLOADERGX (no more wasted time to acces the games). So what a pleasure !
But yesterday i tried to get the folders images to acces the initials Wii Channels (not the games) via usbloader GX like before with the Wii menu.

I put the covers on my SD card, and i tested if it worked via usbloader. Some worked ok but i don't remember what channel gives me a black screen (it was late at night) and just before another says me "no networking work " or something like that. At this moment wiimote could not shutdown the Wii.

So I push the shutdown button from the front cover to put it off, push again tu put it on and then the wii boot on usbloader GX but ... the problem begins. The wiimote doesn't work : it blimp but no arrow on the screen. I do it again : same thing.

OK. So i boot on priloader (push power + reset button), the menu appears, but same thing the wiimote (+, -, arrow) blimp but doesn't work (+, -, arrow).

I've tried all the support solutions (re synchronize the wiimote , plug out / in all the cables, waiting, etc...)
The result is Wiimote is unable to work. What a pity for my childrens, i was so fair ...

How could i do to repair this problem ?
I must precise some things :
1 - i can ping my Wii,so it seems the wi-fi is OK.
2 - The DVD drive doesn't work anymore. It's the reason i hack my Wii for USB use.
3 - I can't anymorre turn on/off my Wii with the wiimote.
4 - I use the original wiimote not the motion plus adapter

It can be the bluetooth module which is broken, but how can i be sure to avoid disassembling the Wii ?

Any response for anyone will be greatly appreciated.

Your sensor bar may be broken or not working well with the wii you have I had this problem today and switched and now works great I was looking for answers and saw this post thought I'd come back and let everyone know,you might have had two different wiis I saw a lot of people saying it was the wii motion plus controllers now I'm on the hunt to see if this works for every one let me know how this goes everyone who sees this.

MarcoCruz · Sep 26, 2020

Hla said:
yes i've bootmii in the root of my SD :
here's the .ini config :
# BootMii config file
# Video mode, possible settings:
# NTSC, PAL50, PAL60, PROGRESSIVE
VIDEO=PAL50
# Autoboot, possible settings:
# SYSMENU, HBC
#AUTOBOOT=SYSMENU
# Autoboot delay, in seconds:
# Default is 5
#BOOTDELAY=5

but how can i boot on it ?
I don't understand " Maybe doing the button combo you can access the System"

This specific post saved my day. Thanks.

Enabling "AUTOBOOT=SYSMENU" solved my issue.

Hardware Usbloader GX 3.0 boot OK but no more wiimote !

GBATemp's lurking knight

Member

GBATemp's lurking knight

Member

GBATemp's lurking knight

Member

Member

GBATemp's lurking knight

Member

Active Member

Member

Similar threads

Popular threads in this forum