You can get the firmware here: https://code.google.com/p/wl500g/
For RaLink router setting custom PRIME MAC is a good solution!
Tutorial [HOW-TO] Have a homemade Streetpass Relay
- Thread starter dicamarques
- Start date
- Views 2,013,135
- Replies 7,502
- Likes 27
- Status
For RaLink router setting custom PRIME MAC is a good solution!
You just need to configure a DNS server on a StreetPass router, the second router is not neccessary. Though it's not straight-forward if the router is not in the router mode and need some linux experience to configure a DNS for the router manually.
- Joined
- Jun 25, 2010
- Messages
- 1,096
- Trophies
- 1
- Location
- Your computer's Recycle Bin
- Website
- www.google.com
- XP
- 1,929
- Country
You need to have the same ssid has Mcdonalds. Só you need the.Mac and the ssid from that Mcdonalds
Right, and the SSID I'm using is attwifi, which is the one the McDonald's is using. They also have McDonalds Free WiFi behind a TOS acceptance screen, but my 3DS is picking up StreetPasses at the location without connecting to that. This leads me to assume that it is the attwifi SSID that's the Nintendo Zone. So for my HomePass relay I've got SSID: attwifi and BSSID: MAC address of that gateway at McDonalds. Still no StreetPasses via the home relay.
is the wl500gp-1.9.2.7-rtn-5066.trx the proper update to use for the new firmware file to put on my router and then hit update on my router?
or is it RT-N12-1.9.2.7-rtn-r5066.trx
or RT-N12B1-1.9.2.7-rtn-r5066.trx that i need?
just want to make sure i get this right so nothing bad happens in this process.
I'm using a Raspberry Pi with an Asus USB-N53 WiFi adapter. All of the HomePass MAC addresses work and I pick up StreetPass tags from them, so I assume my setup is working. Just trying to clarify if my expectation is correct: If I use the same SSID and BSSID (MAC address) as a local Nintendo Zone, should I be picking up StreetPass tags of actual local visitors to that Nintendo Zone StreetPass relay?
Worth remembering that you can only "relay" the same point once in eight hours, if I am not mistaken, so it could take some time. Is there any possibility that noone went there with their 3ds? Maybe over the weekend it will get some streetpasses.
I try it every night cycling through the local MAC addresses for a few hours. I went to one of the locations this week to verify that there were actually hits there and got some. I suppose I could test it with a buddy.
Selcouth I've been reading about the streetpass relay and looks like there is another thing that it checks: The country code. Im not sure if that's the channel or is any other kind of info, but if its different, it wont work. Im also not sure if you can check that without logging on the router.
Hello guys, its just working in my brother's notebook but he isn't in town now and I'm trying it on mine but when I start the Virtual Router it says that: "Can not manage Virtual Router. The Service is not running", what could it be?
And plus, a friend of mine is trying and:
- He can start the virtual router.
- He can connect in the attwifi network with the 3ds
- He didn't find anybody after start the MacCycle.
What could it be?
And plus, a friend of mine is trying and:
- He can start the virtual router.
- He can connect in the attwifi network with the 3ds
- He didn't find anybody after start the MacCycle.
What could it be?
unfortunately i dont know thing one of flashing these firmwares to my router. I managed to brick 2 routers trying to get these to work so i can homepass. So far i dont think this will ever work for me.
I use windows 7,
Router has 3.0.0.4.374_311-g6d4f56e firmware
Router is RT-N53
was looking at the tomatousb but i dont know how id flash it properly without bricking a third router.
I have used this before, with some trouble. Any help would be greatly appreciated.
I start my network and connect to it. However on the test, most of the time it does not work without resetting many, many times.
However on the oiff-chance it DOES work, it has no other problems. Does anyone know what is causing this and how to make it work with no trouble?
Respond quickly so that I can do this tonight please.
I start my network and connect to it. However on the test, most of the time it does not work without resetting many, many times.
However on the oiff-chance it DOES work, it has no other problems. Does anyone know what is causing this and how to make it work with no trouble?
Respond quickly so that I can do this tonight please.
For RT-N12 just look at the sticker at tha back of your router, hadrware revision must be displayed here. Wl500g fitmware is only compatible with the basic and B1 hardware, buh NOT C1/D1/HP.
For RT-N53 I believe there is no custom firmware yet, at least no wl500g or dd-wrt which is only compatible with the script for now. But 3.x.x Asus formware may be compatible too, you jest need to check if wget application is in the router, the rest should be enough.
You can add your MACs to nzone.macs file, but it will be updated after all MACs was used. Which custom MACs you wanted to use?duke_srg I configured it and it worked. Thats why I posted here. To help others with the same problem. Btw, is there any way to use your script and a custom maclist that is in my dropbox or in my computer?
duke_srg Its a nice community but most of them won't be able to change their macs. So its like a custom list with that macs
How do I edit the file on ddwrt? I use windows 7 as my OS. Do I use WinScp for that?
Also: Why when I write the quick reply some words are eaten? Its like it cut out a part of the text.
How do I edit the file on ddwrt? I use windows 7 as my OS. Do I use WinScp for that?
Also: Why when I write the quick reply some words are eaten? Its like it cut out a part of the text.
so would that mean i cannot homepas with this current router i have, or should it be fine todo so?
duke_srg I configured it and it worked. Thats why I posted here. To help others with the same problem
It is easier to make a try with the script and any Boroadcom-based ASUS 3.x.x firmware router, such as your RT-N12 and RT-N53. I just did't test it because for the last almost 10 year's I recommend and personally get only WL500g custom firmware compatible routers and flash it just out of the box. But it stimm might work on 3.x.x and you wont break it.
- Status
Similar threads
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
@
Veho:
Illinois is working to ban toxic food additives that have been banned for decades in other countries; additives that can be replaced and all those countries still have Skittles and Mountain Dew. Title of the piece: GUBMINT WANTS TO TAKE AWAY YOUR CANDY -
-
@
SylverReZ:
@Veho, Sounds and smells like bullshit. They don't give you cancer, and California should know that. I don't get why they stick labels that say "may or may not cause reproductive harm or cancer". -
-
-
-
-
