Tutorial  Updated

4.82 Ferrox Cobra CFW and Webman for beginners

First, let's make clear that there's no one size fits all guide, this is most likely not the way to get the maximum amount of features (that would be a non-lite Rebug), it's probably not the most efficient way, it's not 100% compatibility (no single method is), it does not cover PSN packages - however it's decently polished, reasonably detailed, and I've actually tested it :)

I also have a CECH-C (phat, nand, with PS2 CPU) console and assume you want to install stuff to the internal hard drive.
I also assume your console is downgradable to 3.55 and fully stock (although you will be reminded of being sure of such during the related steps)

now i have installed the ferrox 4.82, is it obligatory to do the last steps ? ( installa habbib QA run it and install Rex Cobra 7.5 )? what do you recommend me? also many thanks, does it need to be installed by usb or via package manager?
No, in fact what I personally did is:

Exploit/CFW
  1. Update to 4.82 if you haven't already
  2. Follow the instructions for software "downgrading" until your console triple-beeps and powers off, meaning the exploit should have done its job. I personally used a TDK 8GB, formatted to FAT32 with 4 kB blocks, and set the actual exploit webpage (with the pinkish background) as homepage then rebooted before running the exploit.
    [Note: the above description and link applies to PS3XPLOIT V1. You are free to use V1 or V2, both available from the same page, at your free choice.]
  3. Remove USB, Turn the PS3 back on and let it do the filesystem check...
  4. Download Ferrox 4.82 Cobra and put it on USB, renamed to /PS3/UPDATE/PS3UPDAT.PUP (this is the standard path for OFW or CFW installers).
  5. Insert stick in console again, update from system settings > removable media.
    If it fails to be detected try recovery mode (with the power off, hold the power button until you hear three total beeps and the console is off again, release for 2 seconds, start holding again until it beeps twice in a row = 4 beeps since you released and re-held the button).
    Follow the instructions.

Optional: Install a link to the Cybermodding appstore website
  1. Game > ★ Package installer > System storage > Ferrox mod installer
  2. Game > Ferrox mod installer > homebrew store > install
  3. Network > cybermodding homebrew store (replaces the link to the PS3 manual).
You navigate it like a website (R3 zooms, right stick scrolls, arrows or analog move pointer, X clicks, L1 back, R1 forward in history...)

If you want to practice, you can download Webman directy on your console instead of performing the next step on your PC: backup managers > webman mod 1.47.06 (the first one as of today) > point to USB drive, don't press X on it, press start to download

Alternatively you can just browse to http://homebrewstore.altervista.org/ on PC or console.

Webman installation
  1. Get Webman_mod_1.47.06_Updater.pkg and copy it to the root of the USB drive
  2. Also get the PSP launcher if you want to run said console's ISOs; only the "PSP_remaster_launcher_fixed.pkg" is required
  3. Game > ★ Package installer > Install package files > Standard > all the stuff we downloaded in the previous steps
  4. Game > webman updater mod etc etc. Hold L1 as you start it, until you're back to the XMB. You can now uninstall Webman Updater (triangle > delete).

"Installing" software (ISO/folder)
While Webman is running, you can connect to your console via FTP without any further settings (press Select+Start while the XMB is visible to check the IP address), create appropriate subfolders of dev_hdd0, them being: BDISO-DVDISO (for decrypted movies), PSXISO-PS2ISO-PS3ISO-PSPISO (for games of those consoles), GAMES (for extracted, folder-style PS3 games), and upload games in supported formats to said folders.

Alternatively, you can download and install Irisman File Manager if you want an on-console file manager. It is straightforward to use and supports NTFS out of the box, including the "Mount and exit to XMB" feature to install nonsplit .pkg with the XMB's package manager without double copying.
However it has a bug: after use, you should always go back to the root and unmount the NTFS drive, else the file manager won't launch again without that drive connected (unless you FTP in and delete the settings)

Installing software (PKG)
  1. Deliver the .pkg to your console. This can be done in many ways, some of which are:
    • FTP: copy the file to /dev_hdd0/packages/
    • FAT32 flash drive: Only for packages that fit. Simply put them on the root, or a "packages" subfolder of the root, of said external disk.
    • NTFS hard drive (bubble method): Browse to the packages in IRISMAN's file manager and click on them.
    • NTFS hard drive (remount method): Browse to the packages in IRISMAN's file manager, press circle on one of them, select "mount and exit to XMB", go immediately to next step.
  2. Go to Game > ★ Package Manager > ...
    • FTP: ... > Install Package Files > PS3 System Storage > your package
    • FAT32 flash drive: ... > Install Package Files > Standard or Package Directory > your package
    • NTFS hard drive (bubble method): ... > Playstation Network Content > your package
    • NTFS hard drive (remount method): ... > Install Package Files > Standard > your package
  3. Your package is now installed. You can find the applications in the appropriate main menu (Game, unless it's a video-related application, etc)
  4. You can delete the files you used in the previous steps.
  5. You may need to install licenses for non-DRM-free packages. The most common way is by installing the ReactPSN homebrew (yep, another package), copying the licenses (RAP, RIF, EDAT) to an "exdata" folder of a FAT32 hard drive, creating or renaming a second PS3 user called "aa", then running ReactPSN while holding L1 until it returns to the XMB.

Running games
  1. Game > Webman Games > pick your poison, you should get a notification saying the game was mounted. Alternatively you can go to Game > Webman Games > Webman Setup > PS3 Webman Games for a grid view in the web browser
  2. For PSP games, now go to Game [> Webman Games > PSP] > PSP Launcher, then select with or without local multiplayer tunneling (adhocparty)
  3. For PS1/PS2, now go to Game > Playstation[2] Format Disc.

Tips
  • The Webman settings, however daunting at first, have useful features such as fan control and a list of button combos: watch what you click but don't hesitate to look at them!
  • By default the fan will have a very high minimum in PS2 mode (even before said games are started), don't panic!
  • Similiarly, the power LED going yellow when entering or leaving an application is not a sign of disaster.
  • You can control Webman via any modern browser: just connect to your PS3's ip address.
  • "Cobra" firmwares, compared to normal ones, have integration (but not necessarily the required software built-in) for FTP, ISO loading, etc -- the name comes from Cobra, who is a company that made PS* modding tools including an ODE and in particular a dongle-based CFW, "Cobra USB v6".
 
Last edited by Ryccardo, , Reason: New links, package guide

SG854

Hail Mary
Member
Joined
Feb 17, 2017
Messages
5,215
Trophies
1
Location
N/A
XP
8,104
Country
Congo, Republic of the
What is the best fan controls you recommend? I disabled the dynamic fan and enabled syscon which is the system default fan. When I first installed webman I noticed the fans running very fast so I used sys fans default.
 

joe7dust

Member
Newcomer
Joined
Nov 25, 2017
Messages
18
Trophies
0
Age
37
XP
53
Country
United States
Can you explain the process of playing backups step by step? I haven't been able to get much of anything to work aside from .pkg files. I have ftp set up. For example I have one game that is in a folder called "BLES01138" and in that is a folder called "PS3_GAME" and a file named "PS3_DISC.SFB". I tried just putting them in the PS3ISO directory as is but cannot get them to show up anywhere even in webbrowser mode it says 0 games. Is there a tool to convert games in this format into an ISO or PKG single file?

edit: I've just noticed that I probably created this PS3ISO directory and it is in the wrong spot. I flipped thru just about every directory on my HDD and I cannot find the list of directories that webMAN is pulling, there should be a place where folders both PS3ISO and PSPISO,etc. all coexist right?
 
Last edited by joe7dust,

joe7dust

Member
Newcomer
Joined
Nov 25, 2017
Messages
18
Trophies
0
Age
37
XP
53
Country
United States
Can anyone please help? I might have to switch to multiman I heard that works on 4.82 now but can only find guides/download links for 4.81 thru Google and the official thread linked in the will was edited last in 2012.
 

Ryccardo

Penguin accelerator
OP
Member
Joined
Feb 13, 2015
Messages
7,687
Trophies
1
Age
28
Location
Imola
XP
6,902
Country
Italy
What is the best fan controls you recommend? I disabled the dynamic fan and enabled syscon which is the system default fan. When I first installed webman I noticed the fans running very fast so I used sys fans default.
I currently use automatic (software), "at 66 celsius" whatever that number is supposed to mean, with 30% minimum - but with half a day I don't know how stable is this setup...

Can you explain the process of playing backups step by step? [...] Is there a tool to convert games in this format into an ISO or PKG single file?
Frankly I haven't tried extracted PS3 games yet (or PS3 games at all), but I know GenPS3ISO exists

edit: I've just noticed that I probably created this PS3ISO directory and it is in the wrong spot. I flipped thru just about every directory on my HDD and I cannot find the list of directories that webMAN is pulling, there should be a place where folders both PS3ISO and PSPISO,etc. all coexist right?
They're subfolders of the HDD root (ie dev_hdd0/PS3ISO), I think only Multiman creates them automatically

I might have to switch to multiman I heard that works on 4.82 now but can only find guides/download links for 4.81 thru Google
What do you need exactly?
Multiman for 4.82? The 4.81.02 one from the appstore I've recommended appears to work fine
The 4.82 official update? https://www.playstation.com/en-us/support/system-updates/ps3-fr/

Can we play ps2 game disk using webman???
I don't know, there's a Game > Webman Games > Setup > Insert Disc option but I can't try it
 

joe7dust

Member
Newcomer
Joined
Nov 25, 2017
Messages
18
Trophies
0
Age
37
XP
53
Country
United States
I found answer, just kept digging till I found the /games folder, it actually was me copying a game from disc that made me notice (new file created there).
 

joe7dust

Member
Newcomer
Joined
Nov 25, 2017
Messages
18
Trophies
0
Age
37
XP
53
Country
United States
Yes after I changed directory, not talking about the one I was copying from disc.

Multiman managed to find all of them instantly even though it's version 4.81 from a good while back.
 
Last edited by joe7dust,

THYPLEX

Well-Known Member
Member
Joined
May 20, 2017
Messages
632
Trophies
0
Age
28
Location
Rome
XP
747
Country
Italy
Reboot the console, if it's still not there try again the updater holding X instead... it doesn't always stick the first time
I've installed FERROX Cobra and webman , now , of i want to play a ps3 iso i just need to put It in the ps3 isos folder of webman through FTP CONNECTION ?
 

Ryccardo

Penguin accelerator
OP
Member
Joined
Feb 13, 2015
Messages
7,687
Trophies
1
Age
28
Location
Imola
XP
6,902
Country
Italy
Will the psp remaster launcher also work on 4.81.2 rebug rex custom firmware?
I don't know for sure, this isn't a Rebug support topic... but the basic Webman/Multiman functionality should be the same on any Cobra-enabled CFW


i want to play a ps3 iso i just need to put It in the ps3 isos folder of webman through FTP CONNECTION ?
That should do it, but I haven't tried PS3 games yet (and probably won't in quite some time)
 

kumikochan

Well-Known Member
Member
Joined
Feb 4, 2015
Messages
3,753
Trophies
0
Age
36
Location
Tongeren
XP
3,311
Country
Belgium
Dynamic fan control set to 65 degrees is a must and if you don't well enjoy your YLOD in the future. Consoles don't use lead anymore and the ps3 fan standard only kicks in after 70 degrees and because of heating cooling constantly the solder will start to crack. If you set it up at 65 degrees it will not heat and cool down that much constantly and keep it constant. But ey, it's your console. I have multiple ps3's all loaded when CFW just came out so many years ago and 2 ps3 fats still going strong thanks to that while most already died off.
 
Last edited by kumikochan,
  • Like
Reactions: Ryccardo

Site & Scene News

Popular threads in this forum

General chit-chat
Help Users
  • No one is chatting at the moment.
    Veho @ Veho: Apply snorgle to pinfor.