Tutorial  Updated

How to play Gamecube, PS1, & N64 games from the wiiu gamepad

For a while now it's been possible to play Gamecube games directly with the Wii U gamepad as a controller. Not only this, you can also play PS1 and N64 games from the gamepad as well! This essentially makes it into a portable experience, well if you're close enough to the console that is. For those who love playing things off-TV, this is a really amazing feature to utilize. You could also play from a TV with the gamepad as a controller if you prefer.
It's now possible to force vWii to use Wii U CPU speeds to get a performance boost on PS1 and N64 emulators! PS1 games are now playable at fullspeed, well at least mainstream games are but not everything works.
Use Section I for Gamecube games, if that doesn't work then you'll need to use Section III instead. This tutorial doesn't require you to hack vWii at all, unless you're going to use section III.

This guide assumes that you have a basic understanding of Wii U hacks. Such as booting into Homebrew Launcher, running CFW, installing with Wup Installer GX2, how to use Nintendont, etc.

EDIT: Tutorial under construction, removed the premade homebrew injects as they used official Wii VC and are considered copyright infringement to share with others. Will add a tutorial on making your own whenever I feel like it sometime.





I. How to play Gamecube games on the gamepad

There are two methods for playing gamecube games on the gamepad. The first method is by making your very own indivisual Gamecube injection using Wii Virtual Console as a base, with the injector script.
The second method is to use a forwarder to Nintendont which then you can select a game from a list. Users mostly prefer method 1 because they like having indivisual gamecube titles on their Wii U home menu. It's all up to you which method you prefer. Both methods have gamepad support and save to the same location either way. You don't need to hack vWii at all to follow this section.




Method 1 - Indivisual Gamecube injects (Injecting Gamecube games into Wii VC which you can install)

1) Use this script to build your own Wii VC injects with gamecube games using your own .iso:
https://gbatemp.net/threads/release-wiivc-injector-script-gc-wii-homebrew-support.483577/


2) Once you've created your inject you should have install files, basically a bunch of .app and .h3 files in a folder. Place these on your SD card in the install folder (Same as installing Wii U games) SD:/install/NameofGame/ ~.app & .m3 files~

3) Download these Nintendont files HERE
(Courtesy of Flump for the upload)

4) Extract all the files to your SD card, Except the install folder (It's only needed for method 2)

5) On your Wii U, run CFW such as HaxchiFW or Mocha. Then launch WUP Installer GX2 to install your gamecube inject (To USB Storage or System Memory)

6) Now launch your gamecube inject from the Wii U home menu. It will ask if you want to use the gamepad as a controller, choose yes.
If your TV is turned off or the HDMI isn't connected, it will also ask if you only want to display on the gamepad. It will reboot into vWii mode and start the gamecube game.

Note: You always need to enable CFW before launching a Gamecube inject, else you'll get Error Code 99-9999 and be forced to shutdown. Even if you exit a game, you still have to enable CFW again before launching another

Note: For some users, the game may result in a black screen. As of right now, there is no explanation to this phenomenon or how to fix it. If this is the case, you won't be able to use method 1 or 2 in this section. Use the "All in One" method instead in Section III below as a workaround.




Method 2 - Nintendont forwarder (Boot directly into Nintendont where you can choose a game from a list)

1) Download these Nintendont files (REMOVED, make your own Nintendont inject with the Wii VC inject script. I can't help since its considered copyright)


2) Extract all files to your SD card, including the install folder (Which contains the Nintendont forwarder)

3) On your Wii U, run CFW such as HaxchiFW or Mocha. Then run WUP Installer GX2 to install Nintendont Forwarder (To USB Storage or System Memory)


4) Launch Nintendont from your Wii U home menu. It will ask if you want to use the gamepad as a controller, choose yes.
If your TV is turned off or the HDMI isn't connected, it will also ask if you only want to display on the gamepad. It will reboot into vWii mode and launches Nintendont.


Note: You always need to enable CFW before launching Nintendont, else you'll get Error Code 99-9999 and be forced to shutdown. Even if you exit a game, you still have to enable CFW again before launching Nintendont

Note: For some users, launching Nintendont may result in a black screen. As of right now, there is no explanation to this phenomenon or how to fix it. If this is the case, you won't be able to use method 1 or 2 in this section. Use the "All in One" method instead in Section III below as a workaround.



Nintendont usage tips

- Use the Official Nintendont Page for info on how to use Nintendont. It has everything you need to know!

- If you press "-" on your gamepad, it will change the control scheme to be rotated a quarter clockwise or back to the original control scheme. If you find the controls to be suddenly awkward, you must've hit the minus button by accident. Hit minus to change it back to regular controls and always remember this for future reference.
- If you hold "L" on your gamepad, your inputs on ZL/ZR will be used as half pressed L and R buttons in-game. Useful for games like Super Mario Sunshine.

- Saves are stored in SD:/saves/ as indivisual memory card .raw files. These are compatible with the Dolphin emulator and you can even use Dolphin's memory card manager to transfer saves from memory card to memory card

- You can trim your Gamecube .iso's to save space altogether by converting them to .ciso format. Use Wit (Wimm's ISO Tool)

- Check the compatibility list HERE . Note that shrunk is not the same as .ciso. All .ciso converted games will work, unlike shrunken games with DMToolbox.



II. How to play PS1 and N64 games on the gamepad

1) Open this google drive link:
(REMOVED, make your own WiiSXR and Wii64 injects with the Wii VC inject script. I can't help since its considered copyright)

2) Download "(WiiU Gamepad) Wii64.rar", and "(WIIU Gamepad) Wiisxr.rar"

3) On your SD card, make a folder called install. Extract the folders within the Wii64 and Wiisxr rar files into the install folder

4) Download Sign_c2w_patcher


5) Open the zip file and drag the wiiu folder to your SD card (merge it with your own if you already have one)

6) Download the latest release of Wii64 (Fix94's port of mupen64): https://github.com/FIX94/mupen64gc-fix94/releases

7) Download the latest release of Wiisxr: https://github.com/Mystro256/wiisxr/releases

8) Extract the folders from the Wii64 and Wiisxr zips to the root of your SD card, except the Readme file (There are two folders within each zip file that you need)

9) On your Wii U, run CFW such as HaxchiFW or Mocha. Then run WUP Installer GX2 and install Wii64 and Wiisxr (Install to System Storage ONLY! Don't install to USB)

10) Run Sign_c2w_patcher from Homebrew Launcher. It will reboot to the home menu with CFW enabled (This is needed to overclock vWii to get a performance boost for the emulators)

11) Run Wii64 or Wiisxr, it will ask if you want to use the gamepad as a controller, choose yes.
If your TV is turned off or the HDMI isn't connected, it will also ask if you only want to display on the gamepad. It will reboot into vWii mode then launch Wii64/wiisxr.


Note: You always need to run Sign_c2w_patcher before launching Wii64 or Wiisxr, else you'll get Error Code 99-9999 and forced to shutdown. You also won't get the overclocked CPU speeds needed for the performance boost.




Using Wiisxr

- You'll need a PS1 BIOS, place it in SD:/wiisx/bios/
- Place your PS1 games in SD:/wiisx/isos/ , they can be in either .bin or .img format (Also include the .cue/.ccd/.sub file if it exists)
- In Wiisxr, you'll need to go to settings to change some things
- Under General where it says Select BIOS, set it to
SD (If you don't do this, you'll have no controls in-game)
- Be sure the option to "Boot with Bios" is set to yes
- Under Video, set the Screen Mode to
16:9
- Go back to General and choose "Save settings to SD", this saves the changes you made, permanently
- As you play different games, you'll need to change the controller type from time to time, either Standard or Analog
- For Crash Bandicoot or games without analog support, you can change the input of the DPAD to "LS-up, LS-Down, etc" to get analog controls with the gamepad. Be sure to save your button mapping to slot 1 so you can load it later. Then go back and choose Save Button Config to SD. (Thanks GameInCanada for that tip!)
- After saving in-game and you return to the Wiisxr menu, you may see a message that says "failed to save". Ignore this message, it did save successfully to your SD card in the wiisxr folder
- You'll also have to switch between Interpreter and Dynarec under Video. Check the Wiisxr compatibility list:


Wiisxr compatibilty list



Using Wii64

- Place your N64 roms in SD:/wii64/roms/
- Don't really have to change settings, everything is set properly by default. Including a memory pak
- Check the compatibilty list to see specific settings


Wii64 Compatibiltiy list



III. All in one solution for Gamecube, PS1, and N64 games on the gamepad (vWii Homebrew Channel with gamepad support. Use this if section I. didn't work on your system)

If you're interested in having Nintendont, Wiisxr, and Wii64 accessible all in one app, you can install Homebrew Channel forwarder on Wii U. This will boot up vWii Homebrew Channel but with gamepad support and you can launch Nintendont, Wiisxr, or Wii64 from there. You NEED to use this method if your Gamecube injects or Nintendont forwarder result in a black screen, this is a workaround to that issue. This section requires that you've hacked vWii already and can install .wad files. Use the Official vWii Hacking Guide if you haven't already, then come back to this guide and continue below.

1) Open this Google Drive link:
(REMOVED, make your own Homebrew Channel inject with the Wii VC inject script. I can't help since its considered copyright)

2) Download "(WIIU Gamepad) HBC.rar"

3) Extract the .rar file to the install folder on the root of your SD card

4) Download the latest release of FIX94's fork of Homebrew Channel (Called Homebrew.Channel.-.OHBC.wad): https://github.com/FIX94/hbc/releases/

5) Place the Homebrew Channel .wad file on the root of your SD card

6) Boot into vWii and install the Homebrew Channel .wad file using YAWMM (Yet Another Wad Manager) or any other wad manager. Ignore all the messages if using YAWMM, keep pressing A to skip the first messages you see. Then browse for the wad file and install it.

7) Exit vWii and run CFW such as HaxchiFW or Mocha. Run WUP Installer GX2 and install HBC (To System Storage ONLY! Don't install to USB)

8) Run "Homebrew Channel" from the Wii U home menu that you just installed. It will ask if you want to use the gamepad as a controller, choose yes.
If your TV is turned off or the HDMI isn't connected, it will also ask if you only want to display on the gamepad. It will reboot into vWii mode and launch Homebrew Channel, but with Gamepad support. Which means you can navigate with the gamepad buttons.

9) From Homebrew Channel you can launch Nintendont, Wii64, or Wiisxr. Don't launch anything else as they don't have gamepad support.

Note: You always need to run Sign_c2w_patcher before launching Homebrew Channel Forwarder else you won't get the overclocked CPU speeds needed for a performance boost with Wiisxr or Wii64. If you're just launching Homebrew Channel for use with Nintendont, you can use regular CFW such as HaxchiFW or Mocha.
 
Last edited by MattKimura,

Sonic Angel Knight

Well-Known Member
Member
Joined
May 27, 2016
Messages
14,395
Trophies
1
Location
New York
XP
12,889
Country
United States
Can someone help me, I tried method 3, when ever i load the homebrew channel from the installed channel on wii u it loads the vwii homebrew channel, any app i try to load shows me this "EXCEPTION (DSI) OCCURED! screen with a bunch of numbers and letters. I made sure to follow the directions properly. :unsure:
 

MattKimura

3DS & WiiU Enthusiast
OP
Member
Joined
Jun 30, 2014
Messages
2,137
Trophies
1
XP
2,935
Country
United States
@Sonic Angel Knight @Lava1000
Have you installed the Homebrew Channel 1.1.4 wad file within vWii? I had this Dsi exception error also, but as soon as I installed the channel in vWii it worked every time for me. Maybe you need to turn off the wiiu and turn it on fresh and try again.
And if anything, you can use sections I and II
 

Sonic Angel Knight

Well-Known Member
Member
Joined
May 27, 2016
Messages
14,395
Trophies
1
Location
New York
XP
12,889
Country
United States
@Sonic Angel Knight @Lava1000
Have you installed the Homebrew Channel 1.1.4 wad file within vWii? I had this Dsi exception error also, but as soon as I installed the channel in vWii it worked every time for me. Maybe you need to turn off the wiiu and turn it on fresh and try again.
And if anything, you can use sections I and II
I did install it, I know cause the wii channel isn't 4:3 like the old channel was, it is now 16:9. I followed the directions as stated. "Install open homebrew channel 1.1.4 on v wii" (Now i have two of them)
 

MattKimura

3DS & WiiU Enthusiast
OP
Member
Joined
Jun 30, 2014
Messages
2,137
Trophies
1
XP
2,935
Country
United States
I did install it, I know cause the wii channel isn't 4:3 like the old channel was, it is now 16:9. I followed the directions as stated. "Install open homebrew channel 1.1.4 on v wii" (Now i have two of them)
There's nothing more to it. Simply installing the wad in vWii, and the forwarder on wiiu with wup installer is all it takes. Then you just run the forwarder.
It's not you, there's an unexplainable reason why this is happening. It seems like section I has a problem with certain users where it black screens. And section III has a problem where the user gets an error every time. And it varies with every Wiiu system.
 

Sonic Angel Knight

Well-Known Member
Member
Joined
May 27, 2016
Messages
14,395
Trophies
1
Location
New York
XP
12,889
Country
United States
There's nothing more to it. Simply installing the wad in vWii, and the forwarder on wiiu with wup installer is all it takes. Then you just run the forwarder.
It's not you, there's an unexplainable reason why this is happening. It seems like section I has a problem with certain users where it black screens. And section III has a problem where the user gets an error every time. And it varies with every Wiiu system.
Okay then, so then i guess I'm just unlucky?

Did you take a survey about it? I have the deluxe system, not sure which one you had that made it work or not. But either way, is okay, thanks for the guide though, is good to know that progress or least workarounds for wii u game pad function is progressing :)
 

Sonic Angel Knight

Well-Known Member
Member
Joined
May 27, 2016
Messages
14,395
Trophies
1
Location
New York
XP
12,889
Country
United States
There's nothing more to it. Simply installing the wad in vWii, and the forwarder on wiiu with wup installer is all it takes. Then you just run the forwarder.
It's not you, there's an unexplainable reason why this is happening. It seems like section I has a problem with certain users where it black screens. And section III has a problem where the user gets an error every time. And it varies with every Wiiu system.
Just curious, how did you install the vwii homebrew channel? It said to use YAMM something (The link you posted wasnt available) So i looked it up. I usually install wads with multi mod manager but it doesn't work with wii motion plus? :unsure:
 

MattKimura

3DS & WiiU Enthusiast
OP
Member
Joined
Jun 30, 2014
Messages
2,137
Trophies
1
XP
2,935
Country
United States

Sonic Angel Knight

Well-Known Member
Member
Joined
May 27, 2016
Messages
14,395
Trophies
1
Location
New York
XP
12,889
Country
United States
Sorry bout that, get YAWMM from here: http://www.hacksden.com/attachment.php?attachmentid=793&d=1369548542

It shouldnt matter which wad manager you use, as long as you can install it.
I guess not, the thing was that YAWMM was confusing, during the boot it asked me a bunch of question i wasn't sure how to answer about ios and what now. Usually MMM doesn't ask anything it just works. :P

So have you had problems with my issue and was it fixable or is it just very spontaneous phenomenon
 

MattKimura

3DS & WiiU Enthusiast
OP
Member
Joined
Jun 30, 2014
Messages
2,137
Trophies
1
XP
2,935
Country
United States
@Sonic Angel Knight @air2004
Those "bugs" aren't gonna be worked out anytime soon. It's highly dependant on the system, as everyone seems to have a unique problem while others can enjoy it problem free. You never know until you try it. All three methods definitely work, just not for everyone. It's an unexplained phenomenon that nobody has looked into. I've always has an issue running a Nintendont forwarder on my wiiu menu. And running Nintendont from the HBC forwarder has been my fix. But one other user reported that HBC wasn't working for them and just black screens, meanwhile Nintendont forwarder worked for them. So we have the opposite problems but both with the same symptom (Black screen after the wii logo)

From what I know so far, you should either use sections I and II, or just section III. If I and II don't work, then section III should be the fix. Basically you can launch Nintendont/wii64/wiisxr from a forwarder. Or you can launch them from Homebrew Channel forwarder.

These methods are not by me, this is literally how you do it. The fix for blackscreen is to run vWii, exit, then run CFW and the forwarder. But this would be annoying to do and only specific users ever need to do this.
 
Last edited by MattKimura,

Jak27

Active Member
Newcomer
Joined
Jan 11, 2015
Messages
42
Trophies
0
Age
28
XP
666
Country
Is there any way to use controllers other than the gamepad in wiisxr/wii64 without needing the use of a wiimote? Whenever I try not using the gamepad when launching one of the forwarders it asks me to point a wiimote, and if I choose to use the gamepad instead then no other controller works once the emulators boot up.
 

Sonic Angel Knight

Well-Known Member
Member
Joined
May 27, 2016
Messages
14,395
Trophies
1
Location
New York
XP
12,889
Country
United States
@Sonic Angel Knight
If you have HBC installed to a USB, move it to system storage. Someone reported that as a fix to their problem. Let me know if that works for you too.
But does that also mean it should cause this to happen if i load the homebrew channel manually from Vwii myself? :unsure:

I tried using it from vwii myself and the problem happens. If it happens there, how can i even get it to work on wii u side of things?
 

OrGoN3

Well-Known Member
Member
Joined
Apr 23, 2007
Messages
3,239
Trophies
1
XP
3,230
Country
United States
But does that also mean it should cause this to happen if i load the homebrew channel manually from Vwii myself? :unsure:

I tried using it from vwii myself and the problem happens. If it happens there, how can i even get it to work on wii u side of things?

Mod Manager/Installer: https://github.com/FIX94/Some-YAWMM-Mod/releases
The correct Homebrew Channel to install: https://github.com/FIX94/hbc/releases

I read your posts. Please do not respond by saying you know you are using the latest HBC because it's 16:9. That's just not an accurate thing to say. The 16:9 forwarder works with the old, closed source HBC as well.

Use the mod manager I linked and install the wad for the Homebrew Channel. When doing this, boot into vWii the normal way from the Wii U menu. Then run the Homebrew Channel and run the mod manager.

Then, when using the channel you already installed in part iii, before you do that, make sure you load up the Wii U's HomeBrew Launcher and run sign_c2w_patcher. Then run the icon for the channel created in part iii on your Wii U menu. And make sure you installed that Wii U channel to NAND, not USB storage.
 

Sonic Angel Knight

Well-Known Member
Member
Joined
May 27, 2016
Messages
14,395
Trophies
1
Location
New York
XP
12,889
Country
United States
I read your posts. Please do not respond by saying you know you are using the latest HBC because it's 16:9. That's just not an accurate thing to say. The 16:9 forwarder works with the old, closed source HBC as well.
The homebrew channel says 1.1.4 and I said that cause it was a distinguishing feature since i had 1.1.2 version installed, the wii u system update caused it to go to a 4:3 format and the new one i did install was 16:9. Looking at both of them on the home menu would not be able to tell them apart. What makes you think I didn't install the one you linked to? I followed the directions properly as stated, and nothing is on the USB. I don't have one plugged in. :mellow:
 

Site & Scene News

Popular threads in this forum

General chit-chat
Help Users
  • LeoTCK @ LeoTCK:
    SUPPORT LOCAL PRODUCTS, MAKE REVOLUTION
  • LeoTCK @ LeoTCK:
    THEY KEEP REMOVING LOCAL SHIt AND REPLACING WItH INFERIOR CHINESE CRAP
  • LeoTCK @ LeoTCK:
    THATS WHY MY PARTNER CANT GET A GOOTWEAR HIS SIZE ANYMORE
  • LeoTCK @ LeoTCK:
    HE HAS BIG FOOT AND BIG DUCK
  • LeoTCK @ LeoTCK:
    d*ck i mean*
  • LeoTCK @ LeoTCK:
    lol
  • Veho @ Veho:
    Mkay.
  • Veho @ Veho:
    I just ordered another package from China just to spite you.
  • SylverReZ @ SylverReZ:
    Communism lol
  • SylverReZ @ SylverReZ:
    OUR products
  • The Real Jdbye @ The Real Jdbye:
    @LeoTCK actually good quality products are dying out because they can't compete with dropshipped chinese crap
    +2
  • BakerMan @ BakerMan:
    @LeoTCK is your partner the sascrotch or smth?
  • Xdqwerty @ Xdqwerty:
    Good morning
  • Xdqwerty @ Xdqwerty:
    Out of nowhere I got several scars on my forearm and part of my arm and it really itches.
  • AdRoz78 @ AdRoz78:
    Hey, I bought a modchip today and it says "New 2040plus" in the top left corner. Is this a legit chip or was I scammed?
  • Veho @ Veho:
    @AdRoz78 start a thread and post a photo of the chip.
    +2
  • Xdqwerty @ Xdqwerty:
    Yawn
  • S @ salazarcosplay:
    and good morning everyone
    +1
  • K3Nv2 @ K3Nv2:
    @BakerMan, his partner is Luke
  • Sicklyboy @ Sicklyboy:
    Sup nerds
    +1
  • Flame @ Flame:
    oh hi, Sickly
  • K3Nv2 @ K3Nv2:
    Oh hi flame
    K3Nv2 @ K3Nv2: Oh hi flame