Hardware Need to disable Turbo Boost

the_randomizer

The Temp's official fox whisperer
OP
Member
Joined
Apr 29, 2011
Messages
31,284
Trophies
2
Age
38
Location
Dr. Wahwee's castle
XP
18,967
Country
United States
Now, before people jump/attack me for saying something so bold as to want to disable such a feature, I have legitimate reasons.

1 - Numerous people have reported that turning Turbo Boost off does reduce performance to a degree, but at the same time, allow the CPU to reach safer temperatures under load, increasing the longevity of the laptop in question.

These thread here also attest to this:
http://forums.macrumors.com/showthread.php?t=1435088
http://tautvidas.com/blog/2011/04/disabling-intel-turbo-boost/

While I plan on getting a desktop in the near future (I hope), I want to do everything I can to reduce CPU temps.
c
Naturally, Lenovo was stupid and disallows users from changing in the BIOS, however, by going to Control Panel -> Power options -> High Performance->Change Power Plans, and then to advanced settings, you change the max processor stat to 99% instead of 100% while keeping the minimum state less than the max state. This has reportedly reduce temps as much as 15 Celsius, heck, even 5-8 Celsius on my CPU would be a welcome change.

My question is, will making these changes shorten the lifespan and/or damage the CPU in any way whatsoever? I am well aware of the consequence of slight performance reductions.
 

trumpet-205

Embrace the darkness within
Member
Joined
Jan 14, 2009
Messages
4,363
Trophies
0
Website
Visit site
XP
693
Country
United States
I still fail to see how disabling Turbo Boost will drop the temperature.

The way Turbo Boost works is that if there is only one active thread it will increase clock speed while disabling other cores. If there are four active threads it will use all four cores at lower clock speed. In essence it does

* Increase clock speed and disabling core(s)
* Decrease clock speed and enabling core(s)

You can think of Turbo Boost as a power saving features. You only disable Turbo Boost for one reason, that is to overclock. At stock speed it makes no sense to disable Turbos Boost.

If you want to limit CPU temperature then simply impose a performance cap (underclock). Underclock does not hurt CPU lifespan.

If you are handy take apart of your Laptop and re-apply thermal paste. You'll be surprised how sloppy OEM can be when it comes to thermal paste. Thermal paste will make a bigger difference.
 
  • Like
Reactions: Celice

the_randomizer

The Temp's official fox whisperer
OP
Member
Joined
Apr 29, 2011
Messages
31,284
Trophies
2
Age
38
Location
Dr. Wahwee's castle
XP
18,967
Country
United States
I still fail to see how disabling Turbo Boost will drop the temperature.

The way Turbo Boost works is that if there is only one active thread it will increase clock speed while disabling other cores. If there are four active threads it will use all four cores at lower clock speed. In essence it does

* Increase clock speed and disabling core(s)
* Decrease clock speed and enabling core(s)

You can think of Turbo Boost as a power saving features. You only disable Turbo Boost for one reason, that is to overclock. At stock speed it makes no sense to disable Turbos Boost.

If you want to limit CPU temperature then simply impose a performance cap (underclock). Underclock does not hurt CPU lifespan.

If you are handy take apart of your Laptop and re-apply thermal paste. You'll be surprised how sloppy OEM can be when it comes to thermal paste. Thermal paste will make a bigger difference.


Wait, you can set a limit to the clock frequency!?

Okay, I tested it without Turbo Boost and it ran cooler for simple programs (Chrome), but more intensive ones, yeah, it was a no-brainer there. As for taking apart the laptop, I have neither the experience nor the confidence in doing so. IIRC, most manufacturers' warranties are void if the CPU is tampered with (in this case, reapplying thermal paste). While I certainly wouldn't mind something like Arctic Silver and I have no doubt that would help tremendously. Again, I simply haven't the skills to dissemble the laptop to get to the CPU, as it's more often than not a real pain in the a** to reach the CPU, is it not? It's my first laptop and for me to try and access the CPU to put new paste on would only lead me to ruining the thing, based off of my past luck and track record.

By the by, how do you set a limit to the CPU frequency? My f***ing BIOS' CPU features are locked as I have stated many times before.
 

war2thegrave

Well-Known Member
Member
Joined
Feb 12, 2010
Messages
139
Trophies
0
XP
295
Country
United States
I still think you are making this issue much bigger than it needs to be.
Look up your model number in a search engine.
If there are notebooks dying due to overheating issues you will certainly find out.
 

Sakitoshi

GBAtemp Official Lolimaster
Member
Joined
May 8, 2012
Messages
2,256
Trophies
2
Age
33
Location
behind a keyboard or a gamepad
Website
sakiheru.blogspot.com
XP
2,911
Country
Chile
By the by, how do you set a limit to the CPU frequency? My f***ing BIOS' CPU features are locked as I have stated many times before.
power settings -> change plan settings -> change advanced plan settings -> processor power management
there you can limit the cpu usage in percentages, i personally limit mine to 70% in the "sakiconomizer" plan, i got like 1 extra hour of battery.
and with the temp problem, what temperatures you see under heavy load??
is normal get temperatures of 80~85°C under full cpu usage(playing borderlands 2 is a good example, i get 82-83°C)
 
  • Like
Reactions: Originality

Originality

Chibi-neko
Member
Joined
Apr 21, 2008
Messages
5,716
Trophies
1
Age
35
Location
London, UK
Website
metalix.deviantart.com
XP
1,904
Country
power settings -> change plan settings -> change advanced plan settings -> processor power management
there you can limit the cpu usage in percentages, i personally limit mine to 70% in the "sakiconomizer" plan, i got like 1 extra hour of battery.
and with the temp problem, what temperatures you see under heavy load??
is normal get temperatures of 80~85°C under full cpu usage(playing borderlands 2 is a good example, i get 82-83°C)
So that's where it was. I knew it was in there somewhere...
 

Sakitoshi

GBAtemp Official Lolimaster
Member
Joined
May 8, 2012
Messages
2,256
Trophies
2
Age
33
Location
behind a keyboard or a gamepad
Website
sakiheru.blogspot.com
XP
2,911
Country
Chile
Close the thread, the issue is resolved since I had a shop put on new thermal paste; Lenovo did a horrible job when they did it.
how did the temperatures drop??
im curious and planing doing the same to my laptop and maybe on a friend's too by myself(i have experience disassembling computers in general) if the cpu can run cool, my friend laptop can go up to 90°C if not on a cooling base or with a ventilator near.
 

the_randomizer

The Temp's official fox whisperer
OP
Member
Joined
Apr 29, 2011
Messages
31,284
Trophies
2
Age
38
Location
Dr. Wahwee's castle
XP
18,967
Country
United States
how did the temperatures drop??
im curious and planing doing the same to my laptop and maybe on a friend's too by myself(i have experience disassembling computers in general) if the cpu can run cool, my friend laptop can go up to 90°C if not on a cooling base or with a ventilator near.

It will take a while for the paste to harden, so I won't see any drops for a while. If you can, have someone do it for you.
 

Celice

Well-Known Member
Member
Joined
Jan 1, 2008
Messages
1,920
Trophies
1
XP
628
Country
United States
Uh...? For it to harden? I'm definitely no enthusiast, but from various overclock sites and subreddits, most people want to get the CPU running as soon as possible so that the heatsink can naturally spread the paste around with its even presure. This includes using the heat to "smooth out" the paste along the face of the processor.

I mean, it sounds more like the place that applied the paste for you is suggesting advice that may not really be advice, as much as it's words to sound professional.
 
  • Like
Reactions: Wizerzak

Foxi4

Endless Trash
Global Moderator
Joined
Sep 13, 2009
Messages
30,818
Trophies
3
Location
Gaming Grotto
XP
29,788
Country
Poland
Close the thread, the issue is resolved since I had a shop put on new thermal paste; Lenovo did a horrible job when they did it.
Figures. Stock paste is usually crap.

If you continue to have temperature issues, send me a PM and I'll guide you through some performance-increasing procedures - kinda too long-winded to post it in a thread without making it seem like a tutorial. :P
 

Originality

Chibi-neko
Member
Joined
Apr 21, 2008
Messages
5,716
Trophies
1
Age
35
Location
London, UK
Website
metalix.deviantart.com
XP
1,904
Country
Uh...? For it to harden? I'm definitely no enthusiast, but from various overclock sites and subreddits, most people want to get the CPU running as soon as possible so that the heatsink can naturally spread the paste around with its even presure. This includes using the heat to "smooth out" the paste along the face of the processor.

I mean, it sounds more like the place that applied the paste for you is suggesting advice that may not really be advice, as much as it's words to sound professional.
After applying thermal paste, it's advised to fix the heatsink on quickly to make sure airborne dust/dirt/contaminants are minimised. It's also advised to fix the heatsink in a cross formation to ensure even pressure and that the paste is spread out properly.

Once the thermal paste is properly applied and the heatsink in place, then turning on the PC will generate heat that will "set" the thermal paste. At this point, let me remind you that another name for thermal paste is ceramic paste. Optimal thermal exchange won't occur until the thermal paste has fully set (or hardened), but the difference is only a degree or two. Usually you can see how effective the thermal paste is with just an hour of use.

...who said heat magically makes thermal paste become "smoother", or that heat spreads the thermal paste for a "more even" application? That's like saying you can make jelly change shapes by heating it up!
 

Celice

Well-Known Member
Member
Joined
Jan 1, 2008
Messages
1,920
Trophies
1
XP
628
Country
United States
By smooth, I meant in the same semantic sense as 'set.'

As I said, I'm no enthusiast, so at times the specific jargon may elude me. Thankfully peeps like you exist to include clarification.
 

the_randomizer

The Temp's official fox whisperer
OP
Member
Joined
Apr 29, 2011
Messages
31,284
Trophies
2
Age
38
Location
Dr. Wahwee's castle
XP
18,967
Country
United States
Uh...? For it to harden? I'm definitely no enthusiast, but from various overclock sites and subreddits, most people want to get the CPU running as soon as possible so that the heatsink can naturally spread the paste around with its even presure. This includes using the heat to "smooth out" the paste along the face of the processor.

I mean, it sounds more like the place that applied the paste for you is suggesting advice that may not really be advice, as much as it's words to sound professional.

Arctic Silver CPU guide mentions that the paste "breaks in" over a certain period of time and that results aren't instantaneous. Not harden after applying and before putting the heatsink on, but as you use the machine.

After applying thermal paste, it's advised to fix the heatsink on quickly to make sure airborne dust/dirt/contaminants are minimised. It's also advised to fix the heatsink in a cross formation to ensure even pressure and that the paste is spread out properly.

Once the thermal paste is properly applied and the heatsink in place, then turning on the PC will generate heat that will "set" the thermal paste. At this point, let me remind you that another name for thermal paste is ceramic paste. Optimal thermal exchange won't occur until the thermal paste has fully set (or hardened), but the difference is only a degree or two. Usually you can see how effective the thermal paste is with just an hour of use.

...who said heat magically makes thermal paste become "smoother", or that heat spreads the thermal paste for a "more even" application? That's like saying you can make jelly change shapes by heating it up!


Bollocks, that came out wrong. I meant to say "after you fasten the heatsink and reassemble the machine". As you use it, the pastes "breaks in" and the desired results happen after so many hours of use.
 

Site & Scene News

Popular threads in this forum

General chit-chat
Help Users
  • K3Nv2 @ K3Nv2:
    Bigonya uses his wiener to mod 360s
    +1
  • Xdqwerty @ Xdqwerty:
    Going to the water park, see ya
  • BigOnYa @ BigOnYa:
    You should update the 360 to newest dash before RGHing it yes. But not a big deal if you don't, you can install new dash/avatar updates after. It's just easier to do it auto online before, instead manual offline after.
  • BigOnYa @ BigOnYa:
    Have fun @Xdqwerty. If you see a chocolate candy bar floating in the water, don't eat it!
  • AncientBoi @ AncientBoi:
    :O:ohnoes: Y didn't U Tell ME that ALSO? @BigOnYa :ohnoes: 🤢🤮
    +1
  • BigOnYa @ BigOnYa:
    Does it taste like... chicken?
    +1
  • S @ salazarcosplay:
    @BigOnYa I wanted to ask you about your experience with seeing south park. Most of the people a bit younger like my younger brother and cousins that are a few younger than me that saw kids found south park funny because of the curse words, kids at school, that seemed like liking the show on a very basic level.

    I could not quite have a in depth discussion of the show.

    How was it for you? As an adult. What did you find the most interesting part about it. Did you relate to the parents of the kids and their situations. Was it satires, the commentary on society. The references on celebrities' and pop culture.
    +1
  • BigOnYa @ BigOnYa:
    I remember seeing the very first episode back in the day, and have watched every episode since. I used to set my VCR to record them even, shows how long ago.
  • BigOnYa @ BigOnYa:
    I just like any comedies really, and cartoons have always been a favorite of mine. Family guy, American Dad, Futurama, Cleveland Show, Simpsons - I like them all.
    +1
  • BigOnYa @ BigOnYa:
    South Park is great cause they always touch on relavent issues going on today, and make something funny out of it.
    +3
  • S @ salazarcosplay:
    @BigOnYa were you always up to date on the current events and issues of the time or were there issues that you first found out thru south park
  • BigOnYa @ BigOnYa:
    Most of the time yea I knew, I watch and read the news regularly, but sometimes the Hollywood BS stuff, like concerning actors slip by me. I don't follow most Hollywood BS (example: the Kardasians)
    +2
  • S @ salazarcosplay:
    @BigOnYa there were relevant issues before south park was made, that's why i think a south park prequel/spinoff would be great. Randy and his friends in their child hood
    +1
  • BigOnYa @ BigOnYa:
    Yea, like them running in high school together, getting into stuff, and how they got hitched and had kids. And how the town of South Park was back then compared to now. That would be cool to see.
  • BakerMan @ BakerMan:
    yeah
  • The Real Jdbye @ The Real Jdbye:
    @salazarcosplay if they made a prequel, it would still be about current issues, cause it doesn't make sense to make it about stuff that happened 30 years ago that nobody cares about anymore
  • The Real Jdbye @ The Real Jdbye:
    it's too late
  • The Real Jdbye @ The Real Jdbye:
    the older south park episodes about particular issues usually age poorly since the topic is no longer relevant
  • The Real Jdbye @ The Real Jdbye:
    an exception is giant douche vs turd sandwich, that's always relevant :P
    +1
  • K3Nv2 @ K3Nv2:
    I was gone for like an hour and none of you thought to write or call pos
  • BigOnYa @ BigOnYa:
    We knew you were going to Sonic to get lunch.
  • K3Nv2 @ K3Nv2:
    Sonics fast I would've been home in 10 mins
  • BigOnYa @ BigOnYa:
    Meet and greet with AncientBoi then?
  • K3Nv2 @ K3Nv2:
    That would've gone slow he's old
    +1
    K3Nv2 @ K3Nv2: That would've gone slow he's old +1