Hi I have successfully moded my 4.2u Will using this wonderful guide over at
https://sites.google...te/completesg/. I have bootmii at boot2 and priiloader too in the real NAND and able to play my backup games from my usb hd using
Configurable USB Loader. So far so good as to using the moded real NAND.
My problem now is I can't seem to get emulated NAND working. I have created an emulated NAND using ModWii (after the modwiifix.bat) but I can't get it started in my Wii.
The exact proceedure is as follow:
start modwii v6.1.5
input "I Agree"
select "S" for SNEEK Installation, Nand Builder, Game Bulk Extractor
select "3" for All the above (Recommended for first time SNEEK users)
* I have also tried "2" Emulated NAND Builder (for SNEEK) as suggested in the Completesg site
select "88" - Featured
select "UD" for UNEEK+DIb
select "D" for Default Setting: COPY_TO_SD
select "D" for Default Setting: COPY_TO_USB
select "U" for USA
select "4.3", not sure if 4.2 is the prefered one.
select "Y" for Post Loader Forwarder Channel, cIOS249, NMM, Priiloader, and JoyFlow Forwarder Channel.
input my wii serial number 12 digits including the last number in ().
input "R" for DarkWii Red Theme - Spin
input "A" for all available channels "Photo, Internet, etc..."
SUMMARY:
ModMii v6.1.5
by XFlak
You are about to install neek2o: UNEEK+DI Rev88 and build a 4.3U Emulated Nand
neek2o Enabled (can be changed in options)
SNEEK and SNEEK+DI SD Access Disabled (can be changed in options)
Install WADs from: temp\WAD\
to Emulated Nand: C:\Wii\ModMii\COPY_TO_USB\nands\pl_us\
A = Add custom folder of wads to install to the emulated NAND
* setting.txt will be created using this serial number: LJF123456789 (not real)
* Install Post Loader Channel
* Install cIOS249 rev14
* Install NMM (No More Memory-Cards)
* Install Priiloader
* Install JoyFlow
* Install Dark Wii Red Theme
* Install Photo Channel
* Install Internet Channel
* Install Weather Channel
* Install News Channel
* Install Mii Channel
* Install Shopping Channel
* Install Wii Speak Channel
Y = Yes, do it now!
B = Back
M = Main Menu
Enter Selection Here:
select "Y" to do it now
afterward I get the following message:
==================================================
4.3U Emulated NAND created by ModMii on Sat 08/11/2012
==================================================
setting.txt built using this serial: LJF123456789
Custom System Menu Theme Installed - Dark Wii Red
Priiloader v0.7 [mod for neek2o] Installed
JoyFlow Forwarder Channel Installed
nSwitch Channel Installed
Post Loader Forwarder Channel Installed
cIOS249 rev14 Installed
Photo Channel Installed
Internet Channel Installed
Weather Channel Installed
News Channel Installed
Mii Channel Installed
Shopping Channel Installed
Wii Speak Channel Installed
NMM (No More Memory-Cards) Installed
afterward, I copied the content of "copy_to_usb" to the root of my usb hd which only has SNEEK and NAND two folders. Then transfer more than 3 games using WiiBackupManager to the usb hd.
I also copied the content of "copy_to_sd" to the root of my sd card which only has APPS, BOOTMIINEEK, PLOADER, SNEEK, WAD folders and neekbooter.dol file.
put the SD (fat32) and connect USB HD (fat32) into Wii
result: black screen. waited 15 minutes nothing happened, repeated several times same result. rename sd:\bootmiineek to sd:\bootmii same black screen (waited >15 minutes); replace the sd:\bootmii\armboot.bin with armboot.bin from another sd that I used for putting bootmii in boot2 on my real NAND. I also copied cert.sys from my original nand dump to the emulated nand's sys folder. result: boots to bootmii menu, start HB, load MMM, start wad mananger, tried to install sd:\wad\neek2o_NK2O_1.wad and got 1 not completed (not exact words), also uninstall priiloader by deleting 0000000xx and rename 100000xx to 000000xx (not exact # of 0s).
I have read alot the last few days. But still can't get eNAND working. Please advise. Thank you.
Wawago